Inquiry
Catalog
3 IN 1 NCE
Uncoiler/Straightener/Feeder Series(Economic And Convenient Type)
Specialty
- Saving space over 60%
- Height efficiency
- Feeding accuracy
- Height stability
- Height precision
Servo Control System
Main menu : Can choose Chinese and English language menu
Single Mode : For stamting testing run purpose and Single safe mode operation
Press Mode : Continual operation mode under press control
NC Mode : Continual operation mode under feeder control
I/0 MONITORING SCREEN
ALARM MESSAGE SCREEN
Programmable Multi - Pitch Setting
Material length setting: Applicable for multi-feeding length setting requirment.
Save Memory Function This function
This function can record feeding length value to save or recall, and it is cooperation with dies number to record memory.
- The new concept and design a reduced space requirement.
- High rigidity mechanical structure design and work with Mitsubishi servo control system to ensure the feeding accuracy.
- Friendly operation by adopting the human-machine interface control system.
- Auto feed monitoring function which can be a safe operation when the interlock with press stamping operation.
- Feeder rolls and straightener rolls have undergone special heat of HRC 60°for high precision leveling, rolls surface chromium-plating and then ground, high hardness, high wear-resistant characteristic and long service life cycle.
- Coordinate with the hydraulic expansion of uncoiler and flip-top straightener head design to increase the job efficiently.
Straightener/Feeder Aspect + Uncoiler
Specifications
Straightener/Feeder Aspect
| Modle | NCE-300 | NCE-400 | NCE-500 |
| Width of Material (mm) | 300 | 400 | 500 |
| Thickness of Material (mm) | 0.4 ~ 3.2 | ||
| Feed Roll (mm) | 72 x 2 pcs | ||
| Work Roll (mm) | 51 x 7 pcs | ||
| Work Roll Arrangement | Upper 4 / Lower 3 | ||
| Main Servo Motor (kW) | 3.5 | 3.5 | 3.5 |
| Air Supply (kg/cm2) | 5 | ||
| P.L.H Adjustment (mm) | 1150 ±70 | ||
Uncoiler Aspect
| Width of Material (mm) | 300 | 400 | 500 |
| Max. Coil Weight (kg) | 1500 | 1500 | 2000 |
| Coil I.D. (mm) | Ø450 ~ 520 | ||
| Max. Coil O.D. (mm) | 1200 (Optional : 1500) | ||
| Uncoiler Expansion | Manual Type (Optional : Hydraulic) | ||
| Uncoiler Motor (HP) | 1 | 1 | 1 |
| Uncoiler Inverter (kW) | 0.75 | 1.5 | 1.5 |
Major Dimension + Uncoiler
Specifications
Major Dimension
| NCE-300 | NCE-400 | NCE-500 | |
| A (mm) | 1240 | 1390 | 1540 |
| B (mm) | 810 | 910 | 1010 |
| C (mm) | 850 | 950 | 1050 |
Straightening Performance + Uncoiler
Specifications
Straightening Performance
| Model | NCE-300 | NCE-400 | NCE-500 | |
| Stock Thickness (mm) | 0.4 | 300 | 400 | 500 |
| 0.8 | ||||
| 1 | ||||
| 1.2 | ||||
| 1.5 | 400 | |||
| 1.8 | 350 | 300 | ||
| 2 | 310 | 250 | ||
| 2.3 | 260 | 250 | 130 | |
| 2.5 | 200 | 200 | - | |
| 2.8 | 150 | 150 | - | |
| 3 | 135 | 135 | - | |
| 3.2 | 120 | 120 | - | |
| The above figures are for the material having yield strength of 245 N/mm2 (tensile strength of 392 N/mm2) | ||||
Standard Accessories
- Programmable multi – pitch setting with cutting signal output function.
( Cutting signal output function is able to control the cutting device. ) - HMI touch screen control panel.
- Two points micro adjustment ( Attached with the dial gauge )
- The straightener work rolls air release.
- Uncoiler photoelectric sensor control and inverter control.
- A-frame coil guide.
- The straightener entrance used four points of material guide mechanism by manual type.
Optional Accessories
- Uncoiler hydraulic mandrel expansion device.
