Inquiry
Catalog
NC Servo
Feeder Series
NC Servo
Feeder Series（0.1~2.0mm）
NC–H Servo Feeder
Double Feed Rolls Thick Material Type
FNC Servo
Feeder Series
SNC Servo
Feeder Series
Specialty
- Air release
- Feeding accuracy
- Height stability
- Customer demand
- Special software program demand
Servo Control System
Main menu : Can choose Chinese and English language menu
Single Mode : For stamting testing run purpose and Single safe mode operation
Press Mode : Continual operation mode under press control
NC Mode : Continual operation mode under feeder control
I/0 Monitoring Screen
Alarm Message Screen
Programmable Multi - Pitch Setting
Material length setting: Applicable for multi-feeding length setting requirment.
Save Memory Function
This function can record feeding length value to save or recall, and it is cooperation with dies number to record memory.
- High rigidity mechanical structure design and work with Mitsubishi servo control system to ensure the feeding accuracy.
- Friendly operation by adopting Human Machine Interface control.
- Programmable multi-pitch setting function to support the different feeding length and feeding frequency requirement.
- Auto feed monitoring function which can be a safety operation when the unit interlock with press stamping operation.
- Applicable for selecting the optional 4 feeding rolls to meet the thicker material request, to ensure the feeding accuracy.
NC Series + Uncoiler
Specifications
NC Series
| Modle | NC-150 | NC-200 | NC-300 | NC-300S | NC-400 | NC-500 | NC-600 | NC-800 | NC-1000 | NC-1250 |
| Width of Material (mm) | 150 | 200 | 300 | 300 | 400 | 500 | 600 | 800 | 1000 | 1250 |
| Thickness of Material (mm) | 0.1 ~ 2.0 | 0.1 ~ 3.0 (Option:4 or 6) | ||||||||
| Feed Roll Up (mm) | 72 x 1 (Pu Roll) | 112 x 1 (Pu Roll) | ||||||||
| Work Roll Down (mm) | 72 x 1 | 112 x 1 | ||||||||
| Servo Motor (kW) | 1.0 | 1.0 | 1.0 | 2.0 | 2.0 | 3.5 | 3.5 | 5.0 | 5.0 | 7.0 |
| Feed Length (mm) | 1~ 9999.99 | |||||||||
| P.L.H Adjustment (mm) | 156~226 | 187~367 | ||||||||
Standard Accessories
- Programmable multi-pitch setting with cutting signal output function.
(Cutting signal output function is able to control the cutting device.) - 5.7 “Mitsubishi Touch panel
- PLC controller - Mitsubishi (Made in Japan)
- NC servo controller - Mitsubishi (Made in Japan)
- Feeding rolls air release.
Optional Accessories
- Micro-Adjusted lubricator
- Gear box driven type device.
((Applicable to material thickness above 3 ~ 4 mm) - Four feeding rolls set unit with gear box driving device.
(Applicable to material thickness above 5 ~ 6 mm)
- Closed loop type AC servo control system.
- Special software demand.
